This system provides a practical solution for repairing, filling, and levelling concrete and masonry surfaces by combining a polymer-modified bonding layer to improve adhesion and flexibility with a superfine cementitious mortar that can be used in two ways: first, as a filler to repair cracks, joints, and surface voids , and second, as a smooth levelling coat to correct surface irregularities and achieve a uniform, fair-faced finish before applying protective or decorative coatings. This system is typically used for restoring blockwork, plaster, fair-face concrete, and other cementitious surfaces, providing excellent bonding, reduced shrinkage, and long-term durability for both interior and exterior applications.

This system is designed as a high-performance solution for precision grouting and structural void filling. It begins with one coat of SBR bonding agent to improve adhesion and cohesion, followed by a self-leveling, non-shrink cementitious grout. The grout provides excellent flowability, high strength, and volume stability, ensuring complete filling of voids under base plates, columns, machinery foundations, and precast elements without shrinkage, segregation, or bleeding.

This system provides a practical solution for repairing and levelling damaged concrete or masonry surfaces and for forming coves at wall-to-floor junctions to prevent water ingress and make cleaning easier. It combines a polymer-modified bonding layer to ensure strong adhesion with a high-strength, non-shrink repair mortar applied at typical thicknesses ranging from 5 mm up to 50 mm per layer for general patching and profiling. For coving work, a smooth radius fillet is formed with an average thickness of 20–40 mm at the junction to create a seamless, durable detail. This system is typically used for repairing spalled concrete, honeycombs, voids, and edges; profiling precast elements; and installing coves in wet rooms, basements, water tanks, industrial floors, or any area requiring durable waterproof detailing

This system provides a flexible and durable solution for repairing and sealing cracks and joints in concrete or masonry surfaces, using a polymer-modified primer to enhance adhesion and a high-performance non-shrink, waterproof cementitious mortar to fill and seal voids. The system is suitable for interior and exterior applications, ensuring excellent bonding, crack-bridging ability, and resistance to water ingress.

This system uses a high-performance, cementitious grout engineered for structural void filling, base plate grouting, bolt anchoring, and concrete jacketing. It offers excellent flowability, rapid strength development, and dimensional stability, ensuring complete filling without shrinkage or voids. Suitable for machine foundations, precast elements, columns, and beams, it provides reliable load transfer. Typical application thickness ranges from 20 mm to 200 mm, depending on the void or gap size.

This system uses a two-component, low-viscosity epoxy resin specifically designed for structural anchoring and crack injection in concrete and masonry. The epoxy provides excellent bond strength, deep penetration into fine cracks, and strong adhesion to concrete, steel, and other construction materials. Typical uses include fixing rebar, anchor bolts, or threaded rods into drilled holes, injecting cracks to restore structural integrity, and bonding precast elements or structural components. The system ensures secure load transfer and long-term durability under static or dynamic loads. Recommended application depths and diameters vary by anchor size and load requirements.

This system uses a high-performance, solvent-free, two-component epoxy putty designed for surface filling, fairing, and sealing fine cracks or pinholes in concrete, masonry, or metal surfaces. The putty provides excellent adhesion, high mechanical strength, and easy application even on vertical or overhead areas without sagging. It is typically used to fill surface imperfections, seal joints, or smooth rough areas before the application of protective coatings, ensuring a durable, defect-free, and smooth finish.

This Cement-Based Joint Treatment system provides a comprehensive solution for repairing, waterproofing, and leveling joints and surfaces. Unimix UW fills cracks and wide joints up to 50 mm with hydrophobic, flexible, abrasion-resistant mortar suitable for harsh internal and external conditions. 2K Fondo provides a rigid, cementitious waterproofing layer with excellent adhesion, preparing old or tiled surfaces for new applications. Unimix SF finishes the system with a smooth, trowel-applied, zero-shrinkage leveling coat, ready for subsequent finishes.

The Polymer-Based Joint Treatment system is a versatile, solvent-free adhesive and filler designed for both interior and exterior surfaces. Offering superior mechanical strength, zero shrinkage, and high initial tack, it bonds strongly to stone, concrete, glass, gypsum, and polyurethane. U-Fix High Tack serves as a smooth skimming compound for repairing and leveling surfaces, filling cracks up to 5 mm, ensuring quick drying, easy sanding, and a high-quality finish ready for painting.